h alt
1
Function
Default Values
Parameters
Examples
Related Commands
This command terminates the execution in process.
Syntax
The halt command will terminate the current measurement and
display the last segment of captured data before the halt command
was entered. This command is only available while executing
measurements and is most useful to halt a repetitive execution.
The available measurement information is retrieved. If trace
memory was only partially filled, only that information will be
available for display.
restore_last_trace
halt restore_last_trace <RETURN>
execute
halt_repetitive_execution
This option will restore the last completed
trace. This is available when using repetitive
execution and is most useful when the trigger
event does not happen very often.
Timing: Commands 9-39