Table of Contents
Advertisement
Assembling the
The analyzer probe is a two-piece assembly, consisting of a ribbon
cable and 18 probe wires (16 data channels and the J and K clock
Analyzer Probe
inputs) attached to a connector. Either end of the ribbon cable
may be connected to the 18-wire connector, and the connectors are
keyed so that you can only attach them in one way. Align the key
of the ribbon cable connector with the slot in the 18-wire
connector, and firmly press the connectors together (see figure 5-1).
Figure 5-1. Assembling the Analyzer Probe
Each of the 18 probe wires has a signal and a ground connection.
Each probe wire is labeled for easy identification. Thirty-six
grabbers are provided for the signal and ground connections of
each of the 18 probe wires. The signal and ground connections are
attached to the pin in the grabber handle (see figure 5-2).
5-2 Using the External Analyzer
Advertisement
Table of Contents
