Catalog On Event Display - HP 8590 E-Series User Manual

The on event programming commands can be set remotely; see the HP8590
E-Series and L-Series Spectrum Analyzer and HP 8591C Cable TV Analyzer
Programmer's Guide for more information about setting the commands.
When the on event programming commands have not been set, or when an
instrument preset has been performed, pressing
the status of the on event programming commands as
ONEOS, ONSWP, TRMATH, ONMKR, ONPWRUP, and ONSRQ commands have
been set, pressing
displays the information in Table 7-5 (see Figure 7-3).
Programming
Command
Front-Panel Key Access: [wj or m
CATALOG
catalogs all of the saved data, that has the specified prefix, that is either on the
PREFIX
memory card or in spectrum analyzer memory. The entire prefix does not have
to be specified. For example, if you want to catalog all the files beginning with
the prefix S, specify S as the prefix and then use CATALOG PREFIX . Prefixed
items can be saved in spectrum analyzer memory by either loading in from a
memory card or using remote programming commands to define them.
Front-Panel Key Access: [ml or m
CATALOG ON EVENT
Description of CATALOG ON EVENT Display
The number of seconds left until the event occurs, followed by the number
of seconds ONCYCLE was set for.
CATALOG ON EVENT displays either a positive number or negative number
of seconds. A positive number indicates the number of seconds left until tht
event occurs. A negative number indicates the number of seconds that has
passed since the event occurred.
The date (in year, month, and day format) and the time (in 24 hour format)
that ONTIME is set for.
REF .B dGm
PEAK
LOG UNDEFINED
UNDEFINED
TRMATH UNDEFINED
IN 86244 SEC
ONOELAY IN -125 SEC
ONMKR ACTIVE
ONSRQ
AT OATE 961881 AT TIME
SC FC
RES GW 3.8 MHz
Figure 7-3. CATALOG ON EVENT Display
CATALOG ON EVENT
UNDEFINED. If the
as ACTIVE.
displays their status
CATALOG ON EVENT
ON CYCLE OF 86400
DELETE
FILE
SELECT
PREFX
EXIT
MENU
RT
displays
When