Indicate - HP 64700 Series User Manual

i ndicate
1
Syntax
Function
Default Values
Parameters
9-46 Timing: Commands
This command selects the statistical information displayed.
This command allows you to select display information. The
display information can be either the time between mark_x and
mark_o or the number of marks (a, b, c, d) between mark_x and
mark_o. For each of the two measures, the maximum and
minimum values or the mean and standard deviation values are
displayed. On the timing diagram, you can also set the display of
signal levels at the cursor on or off.
The default display uses the time interval between mark_x and
mark_o. The signal levels at cursor are off.
time_interval_x_o This option specifies the mark_x to mark_o
time interval is to be displayed.
number_of_marks_ This option specifies the mark count
x_o between mark_x and mark_o is to be
displayed.