Disassembling The Trace Information - HP 64700 Series User Manual

D isassembling the
1
Trace Information
Trace List
Label: Address Data
Base: hex hex
+200 06017C
+201 06017A
+202 000B06
+203 000B16
+204 000B08
+205 000AF8
+206 000AFA
+207 000B16
+208 000AFC
+209 000AFE
+210 06017A
+211 06017C
+212 000B00
+213 060090
+214 000B02
STATUS: M68000--Running user program
display trace disassemble_from_line_number 200
run trace
The "disassemble_from_line_number" trace display option causes
the inverse assembler to attempt to begin disassembling the trace
information from the specified line number. This option is
required for inverse assemblers that cannot uniquely identify
opcode fetch states on the processor bus. This option is not
present for emulators whose inverse assembler can determine
opcode fetch states on the processor bus.
If the line number specified is not an opcode fetch state, the
disassembled information will be incorrect.
Offset=0
Opcode or Status
0090 0090 supr data wr word
0006 0006 supr data wr word
66F0 BNE.B 0000AF8
6765 67 supr data rd byte
60E0 BRA.B 0000AEA
1012 MOVE.B (A2),D0
4880 EXT.W D0
6765 67 supr data rd byte
2053 MOVEA.L (A3),A0
3080 MOVE.W D0,(A0)
0006 0006 supr data rd word
0090 0090 supr data rd word
5493 ADDQ.L #2,(A3)
0067 0067 supr data wr word
528A ADDQ.L #1,A2
step display
More data off screen (ctrl-F, ctrl-G)
mnemonic
Emulation trace complete______...R....
modify break
time count
relative
480 nS
520 nS
480 nS
1.0 uS
520 nS
720 nS
520 nS
480 nS
520 nS
480 nS
520 nS
480 nS
520 nS
480 nS
520 nS
end ---ETC--
Displaying Traces 3-5