Table of Contents
Advertisement
ERROR: Halt_repetitive_execution definition is invalid
This message is displayed when you change the mode or redefine
the sample period is such a way that the halt_repetitive_execution
condition is not longer valid. You need to correct the
halt_repetitive_execution condition.
ERROR: Help keys are not defined properly
This message indicates the timing analyzer help keys have been
incorrectly defined. You need to contact Hewlett-Packard
Customer Support.
ERROR: Label table is full
This message appears when you try to define more than 32 labels.
You need to remove unused labels before continuing.
ERROR: Label width exceeds instrument's capabilities
This message is displayed when you try to create a label having
more probe bits than are available in the analyzer. You need to
limit your entry.
ERROR: Labels used in any other specification cannot be deleted
This message appears when trying to delete a label that is used in
another specification. A label cannot be deleted if it is reference in
a specification. In order to delete the label, remove the reference to
it in all specifications.
ERROR: Mark not found
This message indicats that a find could not locate the mark in the
segment of memory searched. You can try broadening the search
conditions.
ERROR: Mark x or o not found
This message indicates the mark command could not locate the
conditions for one or both of the marks x and o. You should
correct the conditions.
ERROR: Mode is not glitch capture
This message appears when you try to enter a trigger specification
requiring glitch detection and the analyzer is not in glitch capture
C-8 Timing Messages
Advertisement
Table of Contents
