HP 64700 Series User Manual page 178

9-10 Timing: Commands
cursor This parameter specifies the cursor location
as the beginning point of the comparison.
start This parameter specifies the start of trace
memory as the beginning point of the
comparison.
end This parameter specifies the end of trace
memory as the beginning point of the
comparison.
< LABEL> This prompts you to enter a label name or to
select a label from one of the softkeys.
< LABELX> This prompts you to enter a label from the
compare file or to select a compare file label
from one of the softkeys.
modify This option returns the current compare
command to the command line for editing.
off This option defaults the comparison
definition.
rewritten_with_ This option allows you to rewrite the current
current_ trace measurements to the currently selected
measurement compare file.
to_compare_file This option allows you to compare
measurement data from a previously selected
compare file with data from "current"
measurements.
thru This specifies the end comparison range
point. The valid parameters are the same as
those for the from option.