Displaying External Analyzer Information - HP 64700 Series User Manual

D isplaying
1
External Analyzer
Information
Trace List
Label: Opcode or Status
Base: mnemonic
+011 #000000B0C,A2
+012 supr prog
+013 supr prog
+014 #00006007C,(A3)
+015 supr prog
+016 supr prog
+017 0000B04
+018 supr data wr word
+019 supr data wr word
+020 (A2),D0
+021 (A2)
+022 0000AF8
+023 supr data rd byte
+024 0000AEA
+025 (A2),D0
STATUS: M68000--Running user program
display trace external
nary
run trace
The "external" trace display option allows you to include data from
the external analyzer in the trace list. External bits are displayed by
default if your emulator contains an external analyzer. If you do
not wish to have the external bits information in the display, you
can turn them off.
The bits associated with the external analyzer labels may be
displayed in binary or hexadecimal format.
The following display shows three external labels (< CTRL> -F was
entered to scroll the screen left). Labels must be defined in the
external analyzer configuration (and prior to trace command entry)
before they appear as softkey selections when displaying the trace.
Refer to the "Defining External Labels" section in the "Using the
External Analyzer" chapter.
Offset=0
xbits hex then
step display
More data off screen (ctrl-F, ctrl-G)
time count xbits
relative hex
480 nS 0000 00000000 00000000
520 nS 0000 00000000 00000000
480 nS 0000 00000000 00000000
520 nS 0000 00000000 00000000
480 nS 0000 00000000 00000000
520 nS 0000 00000000 00000000
480 nS 0000 00000000 00000000
520 nS 0000 00000000 00000000
480 nS 0000 00000000 00000000
520 nS 0000 00000000 00000000
720 nS 0000 00000000 00000000
520 nS 0000 00000000 00000000
480 nS 0000 00000000 00000000
520 nS 0000 00000000 00000000
760 nS 0000 00000000 00000000
Emulation trace complete______...R....
hi_byte binary then
modify break
hi_byte low_byte
binary binary
low_byte bi
end ---ETC--
Displaying Traces 3-15