Waveform_Size - HP 64700 Series User Manual

w aveform_size
1
Syntax
Function
Default Values
Parameters
9-92 Timing: Commands
This command adjust the waveform size on the display.
This timing diagram command allows you to adjust the size of the
displayed waveforms. A small waveform size allows you to
compare waveforms of a greater number of signals. A large
waveform size allows you to view the signal in more detail.
If you are displaying more channels than can be shown on the
screen, you can use the < Shift> -< up arrow> and
< Shift> -< down arrow> keys to page down or page up through
the channels. The up arrow and down arrow keys shift the display
down or up a waveform at a time.
Small waveforms are displayed by default.
large This option displays the waveforms with a
maximum vertical height.
medium This option displays the waveforms with a
moderate vertical height.
small This option displays the waveforms with a
minimum vertical height.