Table of Contents
Advertisement
Examples
Related Commands
pos_transition_on This parameter specifies a positive transition
on the target signal.
pos_or_neg_
This parameter specifies any transition on
transition_on
the target signal.
< TIME>
This prompts you for the time period to look
for a specified pattern.
nsec,
These parameters specify the units of
usec,
measurement of < TIME> in nanoseconds,
msec,
microseconds, milliseconds, or seconds,
sec
respectively.
process_for_data samples_of X_lower .1 = 1
<RETURN>
none
Timing: Commands 9-71
Advertisement
Table of Contents
