C URSOR
1
Function
Default Values
Parameters
Examples
Related Commands
This command toggles the use of the cursor keys from the
command line to the timing diagram.
Syntax
None
When the CURSOR softkey appears without the asterisk, the right
and left arrow keys are available for command line editing. When
the CURSOR softkey appears with an asterisk (CURSOR*), you
can move the cursor in the timing diagram display with the right
and left arrow. The sample number of the cursor position is shown
on the right of the display. This command is only available from the
softkeys.
The right and left arrow keys are set up for command line editing.
None.
display timing_diagram <RETURN>
CURSOR <RETURN>
CURSOR* <RETURN>
magnify
Timing: Commands 9-19