Table of Contents
Advertisement
Remote Connections
(waveforms). However, if you have specified these X defaults for
"hpterm" only:
hpterm*foreground:
hpterm*background:
the timing analyzer will use the default black on white because
these X defaults were specified for the "hpterm" terminal emulator
only and not the timing analyzer. By adding two more X defaults
specifically for the timing analyzer, the graphics subwindow will
once again match the colors used in terminal emulator window:
hpterm*foreground:
hpterm*background:
timing*foreground:
timing*background:
It is possible in the X Window environment to run the timing
analyzer from a remote host. To gain access to a remote host, the
following criteria must first be observed:
You must have the internet address and hostname of the
remote host in your system's "/etc/hosts" file.
You must have a valid login on the remote host.
You must have the remote host listed in the
"/etc/X0.hosts" file.
You must have the remote host listed in a ".rhost" file in
your home directory on your local system, and your local
system listed in a ".rhost" file on the remote host.
You should refer to the "Customizing Your Local X Environment"
in Using the X Window System: HP 9000 Series 300/800 Computers
for more information on using remote hosts.
green
blue
green
blue
green
blue
Timing Diagrams and Outputs B-7
Advertisement
Table of Contents
