Connecting The Analyzer Probe Lines To The Target System; Figure 4-1. Assembling The Analyzer Probe - HP 64700 User Manual

Connecting the
Analyzer Probe
Lines to the Target
System
Using the External Analyzer 4-2
Connect the analyzer probe to signals of interest in your target sys-
•
tem.
Specify threshold voltages of external trace signals.
•
Label the external trace signals.
•
Select the external analyzer mode.
•
The following steps must be taken to connect the analyzer probe to the
target system:
1. Assemble the analyzer probe.
2. Connect the probe to the emulator.
3. Connect the probe wires to the target system.

Figure 4-1. Assembling the Analyzer Probe