Telecom Input / Output Parameters; I/O Card Expansion Port Output Parameters - Symmetricom TimeProvider 5000 User Manual

Table B-13. GPS, GNSS, and Input Port Parameters (Continued)
Description
Telecom Input Port 2 Priority
Telecom Input Port 2 Frame
Type
Telecom Input Port 2 CRC
Telecom Input Port 2 SSM
State
Telecom Input Port 2 SSM Bit
Telecom Input Port 2 SSM PQL
Value
Note: SSM and MANUAL are supported in v1.2 release. However the
v1.3 release only supports PRIORITY for reference selection, so
SSM and MANUAL should not be use
SSM will be supported in v2.0 release.
Table B-14. Telecom Input / Output Parameters
Description
Telecom IO Port 1
Telecom IO Port 2
Table B-15. I/O Card Expansion Port Output Parameters
Description
I/O Exp. Port 1 - DTI Output .State
I/O Exp. Port 2 - DTI Output State
098-00028-003 Revision A – June, 2011
Appendix B Specifications and Factory Defaults
Default Value
8
freq2048khz
freq2048khz | freq1544khz
Disable
Disable
8
3
Default Value
Input Input | Output
Input Input | Output
Default Value
Enable Enable | Disable
Enable Enable | Disable
Factory Defaults
Value Range
1 to 16
D4 | ESF | CCS | CAS |
Enable | Disable
Enable | Disable
(see note below)
4 | 5 | 6 | 7 | 8
1 to 9
Value Range
Value Range
TimeProvider 5000 User's Guide 395