Symmetricom TimeProvider 5000 User Manual page 394

Appendix B Specifications and Factory Defaults
Factory Defaults
Table B-13. GPS, GNSS, and Input Port Parameters (Continued)
Description
GNSS Priority
GNSS Antenna Cable Delay
GNSS Position Mode
GNSS Position
GNSS Elevation Mask
GNSS Track Mode
1PPS+TOD Input Port 1 State
1PPS+TOD Input Port 1 Priority
1PPS+TOD Input Port 1 Cable
Delay
1PPS+TOD Input Port 2 State
1PPS+TOD Input Port 2 Priority
1PPS+TOD Input Port 2 Cable
Delay
Reference Criteria
Reference Override
Telecom Input Port 1 State
Telecom Input Port 1 Priority
Telecom Input Port 1 Frame
Type
Telecom Input Port 1 CRC
Telecom Input Port 1 SSM
State
Telecom Input Port 1 SSM Bit
Telecom Input Port 1 SSM PQL
Value
Telecom Input Port 2 State
394 TimeProvider 5000 User's Guide
Default Value
1
0
Auto
Lat -
N37:22:43.425
Long -
W121:55:34.815
Elevation - 13.7m ELEV= ±hhhh.h height in meters,
10
Priority-GPS Beidou | GPS | Priority-GPS
Enable
3
0
Enable
4
0
Priority
Port 1
Enable
7
freq2048khz
Disable
Disable
8
3
Enable
098-00028-003 Revision A – June, 2011
Value Range
1 to 16
0 to 65,485 ns
Auto | Manual
LAT = Ndd:mm:ss.ss or
Sdd:mm:ss.sss
LONG = Eddd:mm:ss.ss or
Wddd:mm:ss.sss
-999.9 to 40,000.0 meters
5 to 45 degrees
| Priority Beidou
Enable | Disable
1 - 16
0 - 200,000 ns
Enable | Disable
1 - 16
0 - 200,000 ns
Priority | SSM | Manual
(see note below)
Port 1 | Port 2
Enable | Disable
1 - 16
D4 | ESF | CCS | CAS |
freq2048khz | freq1544khz
Enable | Disable
Enable | Disable
(see note below)
4 | 5 | 6 | 7 | 8
1 to 9
Enable | Disable