Gps, Gnss, And Input Port Parameters - Symmetricom TimeProvider 5000 User Manual

Table B-12. General and Communication Parameters (Continued)
Description
SNMP Trap Version
SNMP v2 State
UTC to TAI offset
RADIUS Authentication
RADIUS Server IP Address
RADIUS Server Key
Remote Syslog Host
Remote Syslog State
Local Alarm Log Buffer Size
Local Event Log Buffer Size
Local Command Log Buffer
Size
Local Security Log Buffer
Size
Auto-Sync
Table B-13. GPS, GNSS, and Input Port Parameters
Description
GPS State
GPS Priority
GPS Antenna Cable Delay
GPS Position Mode
GPS Position
GPS Elevation Mask
GNSS State
098-00028-003 Revision A – June, 2011
Appendix B Specifications and Factory Defaults
Default Value
2
Enable
34
Disable
0.0.0.0
None Max of 32 ASCII characters
0.0.0.0
Disable
100
100
100
100
Enable
Default Value
Enable
2
0
Auto
Lat -
N37:22:43.425
Long -
W121:55:34.815
Elevation - 13.7m ELEV= ±hhhh.h height in meters,
10
Enable
Factory Defaults
Value Range
2, 3
Enable | Disable
20 to 255
Enable | Disable
Valid IPv4 Address
Valid IPv4 Address
Enable | Disable
0 to 100 Kbytes
0 to 100 Kbytes
0 to 100 Kbytes
0 to 100 Kbytes
Enable | Disable
Value Range
Enable | Disable
1 to 16
0 to 999,999 ns
Auto | Manual
LAT = Ndd:mm:ss.ss or
Sdd:mm:ss.sss
LONG = Eddd:mm:ss.ss or
Wddd:mm:ss.sss
-999.9 to 40,000.0 meters
5 to 45 degrees
Enable | Disable
TimeProvider 5000 User's Guide 393