Led Descriptions For Expansion Shelves - Symmetricom TimeProvider 5000 User Manual

Table 3-2. LED Descriptions for Main Shelf (Continued)
LED
Ethernet Port 1
ETH1 link/activity indicator
Ethernet Port 2
ETH2 port link/activity indicator
Local Oscillator State
Indicates the current mode of
operation of the LO servo
Table 3-3. LED Descriptions for Expansion Shelves
LED Name
PWR A Red
Off
PWR B Red
Off
ALM Red
Off
MGMT Green
Blinking Green
Red
REF Green
Amber
Off
Blinking Amber
098-00028-003 Revision A – June, 2011
Label
ETH1 Green - Link has been established
Flashing Green - Link activity
Off - Link has not been established
ETH2 Green - Link has been established
Flashing Green - Link activity
Off - Link has not been established
HOLD Off - Oscillator is operating in Locked mode
Amber - Oscillator is operating in Holdover or
Acquire modes
Flashing Amber - Oscillator is operating in
Warm-up mode
Color
Power A is absent
Power A is normal
Power B is absent
Power B is normal
There are active alarms
There are no active alarms
Management port is connected
Management power has activity
Management is not connected
Valid reference
No valid reference
Inputs disabled
Warm up
TimeProvider 5000 CLI Command Set
Description
Description
TimeProvider 5000 User's Guide 139
Chapter 3