Symmetricom TimeProvider 5000 User Manual page 118

Chapter 3
TimeProvider 5000 CLI Command Set
Next boot image: 2
. . .
Exp8 IMAGE DETAILS
Active image: 2 1.0.4_200811040901
Backup image: 1 1.0.2_200810231325
Next boot image: 2
Level : User, Config, and Admin
set image
Use this command to provision the module firmware image from which to boot.
Command Syntax:
set image {imc|ioc1|ioc2|exp[0-9]}[1|2]
Example 1:
To set the IMC to boot image 1 
tp5000> set image imc 1
Example 2:
To set expansion box 4 (id=exp3) to boot image 2 
tp5000> set image exp3 2
Example 3:
To set IOC1 to boot image 2 
tp5000> set image ioc1 2
Remark: The module must be rebooted to implement the boot image.
Level : Admin only
118 TimeProvider 5000 User's Guide 098-00028-003 Revision A – June, 2011