Table of Contents
Advertisement
Figure 4-15. One-Step Clock
Provisioning NTP
Each Ethernet port on the TP5000 IOC module can be configured as either a PTP
grandmaster or as an NTP server, with PTP grandmaster as the default mode. The
exception is for versions that are purchased as dedicated NTP servers.
Use the
set packet-service
packet-service mode of NTP server. See
command hierarchy.
Use the
set ntp
and TTL parameters. See
Note: The NTP Server feature can either be ordered in a new
system, or added to a previously ordered system as a field upgrade.
Field upgrades require a license activation key. Contact your
Symmetricom representative for more information.
Note: The IP address for the IOC port is configured with the
command whether the port is configured as an NTP server or PTP
grandmaster.
Use the command
a packet service mode of PTP grandmaster.
098-00028-003 Revision A – June, 2011
command to configure the IOC port with a
command to enable NTP on an IOC port and to configure the DSCP
Figure 4-16
set packet-service ioc1-x ptp-gm
Figure 4-7
for the
set packet-service
for the
set ntp
command hierarchy.
to return an IOC port to
TimeProvider 5000 User's Guide 263
Chapter 4 Provisioning
Provisioning NTP
set ip
- Quick Links:
- Configuration Management
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
