Symmetricom TimeProvider 5000 User Manual page 184

Chapter 3
TimeProvider 5000 CLI Command Set

Example 21
To provision the PTP Multicast VLAN ID to 12 for Port 1:
set ptp multicast vlanid ioc1-1 12

Example 22
To provision the interval between announce messages to -6 (0.015625 seconds) for
PTP Multicast on Port 2:
set ptp multicast announce-int ioc1-2 -6

Example 23
To provision the interval between synchronization messages to -5 (0.03125
seconds) for PTP Multicast on Port 2:
set ptp multicast sync-int ioc1-2 -5

Example 24
To provision the interval between delay response messages to -4 (0.0625 seconds)
for PTP Multicast on Port 2:
set ptp multicast delay-int ioc1-2 -4

Example 25
To Enable PTP Unicast dynamic negotiation for port 1:
tp5000> set ptp unicast dynamic negotiate ioc1-1 enable

Example 26
To set the PTP Unicast dynamic maximum lease duration value to 500 seconds:
tp5000> set ptp unicast dynamic lease-duration ioc1-1 500

Example 27
Use the following procedure to configure IOC1, Port 1 for 2 Unicast Static clients:
Client 1: 10.11.11.101, VLAN ID=10, index=1, Clock ID: 0A:11:22:33:44:55:66:77,
Synchronization interval rate = 16 per second (
Announce interval rate = 1 per second (
Delay interval rate = 8 per second (delay-int
184 TimeProvider 5000 User's Guide
Multicast Attributes:
Multicast Attributes:
Multicast Attributes:
Multicast Attributes:
Unicast - Dynamic:
Unicast - Dynamic:
Unicast - Static:
value = -4) ,
sync-int
value = 0),
announce-int
value = -3
)
098-00028-003 Revision A – June, 2011