Symmetricom TimeProvider 5000 User Manual page 156

Chapter 3
TimeProvider 5000 CLI Command Set
tp5000> set output free-run port2 squelch
Example 8:
To provision the output behavior to ON during the holdover state for port2:
tp5000> set output holdover port2 on
Example 9:
To provision the output behavior to ON during the fast-track state for port2:
tp5000> set output fast-track port2 on
Example 10:
To generate a T1-isolated pulse on the selected output port:
tp5000> set output test-mode port2 t1pulse
Level : Config and Admin only
156 TimeProvider 5000 User's Guide 098-00028-003 Revision A – June, 2011