Symmetricom TimeProvider 5000 User Manual page 229

To Enable the VLAN configuration for Index 5 on port 1 of IOC1 
tp5000> set vlan-config state ioc1-1 index 5 enable
Example 6:
To Enable the VLAN for expansion shelf 1 (id=exp0) 
tp5000> set vlan-mode exp0 enable
Example 7:
To configure a VLAN on port 3 of expansion shelf 5 (id: exp4) with VLAN ID = 25,
Priority=0, layer 2 
tp5000> set vlan-config expansion exp4 port 3 vlan-id 25
priority
Level : Admin only
098-00028-003 Revision A – June, 2011
0 layer2
Chapter 3
TimeProvider 5000 CLI Command Set
TimeProvider 5000 User's Guide 229