Symmetricom TimeProvider 5000 User Manual page 207

show snmp
Use these commands to display the SNMP Manager assigned to the agent, all
assigned users (username only), and the SNMP trap version and SNMP trap user.
Command Syntax:
To display the SNMP manager assignment:

show snmp manager
To display the SNMPv3 user configuration:

show snmp user
To display the SNMP TRAP user information (user names only):

show snmp trapuser
To display the SNMP v2-community information:

show snmp v2-community
To display the SNMP TRAP version information:

show snmp trapversion
To display the SNMP V2 state:

show snmp state-v2
Example 1:
tp5000> show snmp manager
Response 1:
-----------------------------------------------------------------------------
|Index|Manager ID
|-----|---------------|--------------------|--------------------------------|
|1 |m192.168.5.187 |192.168.5.187
|.....|...............|....................|................................|
|2 |m192.168.5.144 |192.168.5.144
|.....|...............|....................|................................|
|3 |m192.168.5.171 |192.168.5.171
|-----------------------------------------------------------------------------
Example 2:
tp5000> show snmp user
Response 2:
098-00028-003 Revision A – June, 2011
|Manager Addr
TimeProvider 5000 CLI Command Set
|Engine ID
|0x63000000a1c0a805bb
|0x0123456789010384
|0x63000000a1c0a805bb
TimeProvider 5000 User's Guide 207
Chapter 3
|
|
|
|