Provisioning The 1Pps+Tod Inputs - Symmetricom TimeProvider 5000 User Manual

Provisioning the 1PPS+TOD Inputs

Ports 1 and 2 on the 090-50315-01 version of the I/O module are 1PPS+TOD
inputs.
Note: Disabling the input port will clear all alarms and events related
to this port.
Use the following procedure to set the priority value for these ports, set the cable
delay value, and to enable the inputs (Priority=5, cable delay=2500 ns in this
example).
1. Login at the Admin or Config-user level.
2. Type
set pps-tod priority port1 5
3. Type
set pps-tod cable-delay port1 2500
4. Type
set pps-tod state port1 enable
098-00028-003 Revision A – June, 2011
Provisioning the 1PPS+TOD Inputs
and press Enter.
and press Enter.
and press Enter.
TimeProvider 5000 User's Guide 273
Chapter 4 Provisioning