Symmetricom TimeProvider 5000 User Manual page 177

where the Clock ID is in the form xx:xx:xx:xx:xx:xx:xx:xx
Multicast Specific Attributes - TP 5000:
To provision the PTP Multicast client timeout value:

set ptp multicast client-timeout {ioc1-1 | ioc1-2 |
exp[0-9]} <timeout-value>
To provision the PTP Multicast announce timeout value:

set ptp multicast announce-timeout {ioc1-1 | ioc1-2 |
exp[0-9] port<1-16>} <timeout-value>
where
To provision the PTP Multicast VLAN ID:

set ptp multicast vlanid {ioc1-1 | ioc1-2} <vlanid-value>
Note: The VLAN must be configured with the
To provision the interval between announce messages for PTP Multicast:

set ptp multicast announce-int {ioc1-1 | ioc1-2 | exp[0-9]
port<1-16>} <announce-int-value>
– The interval is 2
To provision the interval between synchronization messages for PTP Multicast:

set ptp multicast sync-int {ioc1-1 | ioc1-2 | exp[0-9]
port<1-16>} <sync-int-value>
– The interval is 2
To provision the interval between delay response messages for PTP Multicast:

set ptp multicast delay-int {ioc1-1 | ioc1-2 | exp[0-9]
port<1-16>} <delay-int-value>
– The interval is 2
Unicast Specific Attributes - Dynamic:
To provision the PTP Unicast dynamic negotiation state:

098-00028-003 Revision A – June, 2011
y= 1|2, the port number
z
seconds, where z= <announce-int-value>.
z
seconds, where z= <sync-int-value>.
z
seconds, where z= <sync-int-value>.
TimeProvider 5000 CLI Command Set
set vlan
command.
TimeProvider 5000 User's Guide 177
Chapter 3