Ifconfig Output; Ping - Symmetricom SyncServer S100 User Manual

ifconfig Output

This screen gives you information about the network configuration of the S100. It lets you
troubleshoot network problems.

Ping

Use the ping command to test the network route between the S100 and a remote host.
This is a diagnostic tool that confirms that all is well between the two devices.
The dialog shown in Figure 4-24 lets you define the following parameters:
Host - URL of the remote host
74
Figure 4-23: Configuration Information
Figure 4-24: Pinging the Remote Host
SyncServer S100
S100 User Guide – Rev. D – June 2005