Symmetricom TimeProvider 5000 User Manual page 198

Chapter 3
TimeProvider 5000 CLI Command Set
reboot
This command restarts one or more of the modules. Using this command can cause
a loss of outputs.
Command Syntax:
reboot {system|imc|ioc1|ioc2|exp[0-9]}
Remarks: Selecting
Selecting
system
outputs.
Example 1:
tp5000> reboot imc
Response 1:
The system is going down NOW!
Sending SIGTERM to all processes
Sending SIGKILL to all processes
Requesting system reboot
Restarting system.
U-Boot 1.1.6 (Oct 23 2008 - 13:17:59) MPC83XX
Symmetricom Time Provider 5000 (TP5000) IMC
Clock configuration:
CPU: MPC8313E, Rev: 10 at 333.333 MHz
INFO: Initializing IOMEM for regset 0
DRAM:
NAND:
Using default environment
........................................
Symmetricom
198 TimeProvider 5000 User's Guide
restarts all system modules and expansion shelves.
system
, or the only IOC, or an expansion shelf disrupts the system
Coherent System Bus:
Core:
Local Bus Controller: 166 MHz
Local Bus:
DDR:
SEC:
I2C1:
I2C2:
TSEC1:
TSEC2:
USB MPH:
USB DR:
256 MB
256 MiB
tp5000_imc
166 MHz
333 MHz
41 MHz
333 MHz
55 MHz
166 MHz
166 MHz
166 MHz
166 MHz
0 MHz
55 MHz
098-00028-003 Revision A – June, 2011