Symmetricom TimeProvider 5000 User Manual page 218

Chapter 3
TimeProvider 5000 CLI Command Set
show tod-source
This command displays the Time of Day Source.
Command Syntax:
show tod-source
Example:
tp5000> show tod-source
Response:
ToD Source
Level : User, Config, and Admin
set tod-source
Use this command to provision the ToD Source to be provided by GPS or the
System.
Note: Setting the Time of Day source to GPS will also set the input
reference port state to Disable.
Command Syntax:
set tod-source {gps|sys}
Example 1:
tp5000> set tod-source gps
Remarks: Command
and
mode time
. See
frequency
Level : Config and Admin only
218 TimeProvider 5000 User's Guide
set tod-source GPS
set tod-source sys
Set REF command.
- gps
has the same meaning as
has the same meaning as
098-00028-003 Revision A – June, 2011
set ref
set ref mode