Symmetricom TimeProvider 5000 User Manual page 206

Chapter 3
TimeProvider 5000 CLI Command Set
show remote-syslog
This command displays the remote syslog server that log messages are sent to
from the TimeProvider 5000.
Command Syntax:
show remote-syslog
Example:
tp5000> show remote-syslog
Response:
State
Remote Address
Level : User, Config, and Admin
set remote-syslog
This command is used to configure a remote syslog server to receive log messages
from the TimeProvider 5000.
Command Syntax:
set remote-syslog {enable <host-addr>|disable}
}
Example:
To enable a remote syslog server at IP address 192.168.5.141 
tp5000> set remote-syslog enable 192.168.5.141
Level : Config and Admin only
206 TimeProvider 5000 User's Guide
- disable
- 0.0.0.0
098-00028-003 Revision A – June, 2011