Communications Connections; Imc Module Versions -01 Through -05 - Symmetricom TimeProvider 5000 User Manual

Chapter 2 Installing
Signal Connections

Communications Connections

The IMC allows user control of the TimeProvider 5000. The EIA-232 serial port and
Ethernet Management port are located on the IMC as shown in Figure 2-6. See
Working With Modules, on page 47 for module installation instructions.
Figure 2-6.

IMC Module Versions -01 through -05

System Management (MGMT) Port
The System Management port is standard 10/100Base-T shielded RJ-45
receptacle. To connect the TimeProvider 5000 to an Ethernet network, use a
shielded twisted pair Ethernet RJ-45 cable. See Table 2-1 for connector pinouts.
098-00028-003 Revision A – June, 2011 TimeProvider 5000 User's Guide 49