Table of Contents
Advertisement
Next Step
If this is your first log-in, your next step is to select the Configuration Wizard link at the top
of the System Status page (see
If you have logged in before and have already configured your S100, skip the Configuration
Wizard and instead choose the item you want from the Administrative Index in the left pane.
Details are then provided in the right window pane. If you have established the S100's IP
address, type it in the browser's Address field and press <Enter>. The browser displays the
screen in
Figure
Figure 3-15: Configuration Wizard: Choose Primary Time Source
Note:
The Configuration Wizard
Using your browser, follow this easy-to-direct sequence of dialogs to configure the S100's
source of time. You will need the wizard only once, unless you change the time source for the
S100.
Every screen in the wizard lets you start over, reset, or (for a screen in a sequence) go back
to the previous screen.
Note:
the Wizard's back button instead:
Use the Reset button to clear the fields of previously typed information.
32
Figure
3-15.
The Configuration Wizard is the most convenient way to configure the S100.
When within the Configuration Wizard, do not use your browser's back button. Use
3-14).
S100 User Guide – Rev. D – June 2005
SyncServer S100
Advertisement
Chapters
Table of Contents
