Pd - Data Stream Select; Pf - Display Fault Log; Table C-6: Data Stream Selections - Teledyne ADFM Pro20 Technical Manual

Timing Card RAM (PI ):
Demodulator RAM (PI ):
Checksum Code/Tables (PT8):
Receive Test (PT3):
Transmit Test (PT4):
Electronics Wrap Test (PT5):
LPF Bandwidth Test (PT6):
Clock Interrupt (PI ):
Error Log:
Power Loss
Auto Restart Occurred
Transducer Communications Error
Self Tests Complete

PD - Data Stream Select

Purpose:
Format:
Range
Default
Description:
Table C-6:
Format Description
PD0 Sends The real water-current data set
PD1 Sends an RDI-defined data set that always uses the same data (except
for parts of the leader data). This data set is useful during user-software
development.
PD2 Not used.
PD3 Sends reduced discharge output data structure.

PF - Display Fault Log

Purpose:
Format:
Description:
Example:
>pf
Power Loss
Auto Restart Occurred
Transducer Communications Error
ADFM Technical Manual (January 2000)
Selects the type of ensemble output data structure.
PDnn
n = 0 to 3 (see description)
PD00
PD selects either the normal output data structure, a special
application data structure, or a fixed data set for transmis-
sion/display as the data ensemble.
Data Stream Selections
The PF-command displays the fault log.
PF
Displaying the fault log will list why a built-in test failed.
This may aid in troubleshooting.
ADFM Commands
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
page C-23