Table of Contents
Advertisement
Operation
If Show Negative has been set to NO (default), then the display will
remain at zero when the output from the sensor drifts below zero. The
analog output signal will also remain at 4 mA if the sensor output is
negative.
4.5.10.3 S
TREAM
The Stream function is useful when the analyzer relates to a TAI
Valve Box. It allows the user to switch the input stream from the
analyzer rather than the Valve Box. This assumes that the analyzer is in
local mode and not being controlled by an external source. If the
analyzer is not interfaced with a Valve Box, this function has no input.
The Stream Selection options are 1/2/3. The selected stream
number will be sent to a Valve Box through the RS232 port.
4.5.10.4 M
ODEL
This function allows the user to select between the options
"PERCENT_3000" or "PERCENT_3000" depending on the anticipated
range of analysis. For percent analysis the system must be equipped with
an appropriate percent analysis micro fuel cell.
4.5.11 Version
The Version screen is a read-only screen that displays the
manufacturer, model, and software version information. It is accessible
from the third System screen.
System screen 3:
Teledyne Analytical Instruments
S
ELECTION
N
UMBER
3000RS-P
74
Advertisement
Table of Contents
