Table of Contents
Advertisement
D-4.2
System Setup and Testing
Setup and testing of the ADFM HTI system is identical to that of the stan-
dard ADFM. Please refer to Chapter 2 in the ADFM Technical Manual for
setup and operation guidelines.
D-5
Technical Specifications
NOTE. The specifications and dimensions listed in this section are subject
to change without notice.
D-5.1
Physical Specifications
1.3750
3.514
5 BEAM (ONE VERTICAL)
1200 kHz TRANSDUCER
Figure D-3.
Outline Installation Drawing
ADFM Technical Manual (January 2000)
24" STANDARD
(CAN BE SIZED TO APPLICATION)
CONNECTS TO STD.
2" GATE VALVE
STD. 1/2" STAINLESS
STEEL PIPE
OPTIONAL NIPPLE
CONNECTS TO MAIN ELECTRONICS
ADFM Hot Tap Insertion
TRANSDUCER PCA
HOUSING
710-4025-00
CLAMP/SEAL ASSY. HGS.
page D -5
Advertisement
Table of Contents
