Setup Menu: Features/Functions Configuration; Setup>Data Logging (Data Acquisition System, Das) - Teledyne T400 User Manual

2.5

SETUP MENU: FEATURES/FUNCTIONS CONFIGURATION

Use the Setup menu to configure the instrument's software features, to gather information
on the instrument's performance, and to configure and access data from the Datalogger,
the instrument's internal data acquisition system (DAS). Once the setups are complete,
the saved configurations can be downloaded to a USB drive through the Utilities>USB
Utilities menu and uploaded to other instruments of the same model (Section 2.6).
2.5.1 S >D
ETUP ATA
The Datalogger can be configured to capture and store user-defined data, which then can
be viewed in the Alerts page, if elected, as well as downloaded from the instrument to a
USB flash drive or using NumaView™ Remote software for examination and analysis.
Figure 2-31 shows a new log; Figure 2-32 shows a sample existing log, which can be
edited or deleted, and Figure 2-33 provides illustrated instructions for setting up a new
log, with Sections 2.5.1.1 and 2.5.1.2 providing additional details.
To transfer captured instrument data to a flash drive see Section 2.5.1.3.
083730400A DCN8130
L (D A
OGGING ATA CQUISITION
Teledyne API – Model T400 O
S , DAS)
YSTEM
Analyzer
3
59