Table of Contents
Advertisement
? - Help Menus:
Purpose:
Format:
Description:
Break:
Purpose:
Format:
Description:
Example:
BROADBAND ADFM VERSION 6.37
RD INSTRUMENTS (C) 1991-94
ALL RIGHTS RESERVED. >
ADFM Technical Manual (January 2000)
Lists the major help groups.
x? (see description)
Entering ? by itself displays all command groups. To display
help for one command group, enter x?, where x is the com-
mand group you wish to view. When the ADFM displays the
help for a command group, it also shows the format and cur-
rent setting of those commands. To see the help or setting for
one command, enter the command followed by a question
mark. For example, to view the WS-command setting enter
WS?.
Interrupts ADFM without erasing current settings.
<BREAK>
A BREAK signal interrupts ADFM processing. It is leading-
edge triggered and must last at least 100 ms. A BREAK ini-
tializes the system, sends a wake-up (copyright) message, and
places the ADFM in the DATA I/O mode. The BREAK
command does not erase any settings or data.
<BREAK>
ADFM Commands
page C-7
Advertisement
Table of Contents
