5-4.5 Modem Test; 5-4.6 Recorder Test - Teledyne ADFM Pro20 Technical Manual

5-4.5 Modem Test
This test checks the modem operation.
a. Start BBTALK. Press the
b. Type
c. Type
d. Type
e. Verify these readings are present and correct.
>mp1
>mo
Modem is OK
Modem state/connect status = COMMAND/NOT CONNECTED
Primary Port = RS-232
f. Type
g. Type
h. Verify these readings are present and correct.
>mp0
>mo
Modem is NOT OK
Modem state/connect status = OFF/NOT CONNECTED
Primary Port = RS-232
>
5-4.6 Recorder Test
This tests the recorder — it does not destroy any data.
a. Start BBTALK. Press the
b. Type
c. Type
d. Verify these readings are present and correct for your system.
>rt
Recorder Message...
RAM --------------PASS
Cards Found ------
Memory Found -----
Write/Read -------PASS
Block Copy -------PASS
Recorder NOT Erased
Recorder BIT...PASS
>
ADFM Technical Manual (January 2000)
End
CP
to clear the fault log.
MP1
to turn the modem power on.
MO
.
MP0
to turn the modem power off.
MO
.
End
CP
to clear the fault log.
RT
.
0 1 14 0
1
20 MB
ADFM Test Procedures
key to wake the ADFM.
key to wake the ADFM.
0
page 5-7