Software Operation
3-1
Introduction
The primary tool used to program, deploy, and operate the ADFM is the
software program WinADFM. Additional utility programs are available if
required for specific functions, however, their use is not required in normal
operation. Most of these utilities are engineering tools used during devel-
opment and testing of the ADFM. However, if you are experiencing a spe-
cific problem with an ADFM or data, you may be provided with one of
these utilities and instructions for its use.
3-2
Computer Requirements
The following are requirements for the computer(s) used to interface with
the ADFM.
Minimum Requirements:
• IBM Compatible 486 processor or better
• Windows 95
• VGA color or better display monitor
• Hard Drive (minimum 50 MB free disk space)
• Hard Drive data backup method
• 3.5" Floppy Drive
• Serial Port (1)
• Modem (telemetered sites only)
ADFM Technical Manual (January 2000)
Software Operation
3
Chapter
page 3-1