Show Cluster Members - Cisco Catalyst 3550 Command Reference Manual

Chapter 2 Catalyst 3550 Switch Cisco IOS Commands

show cluster members

Use the show cluster members privileged EXEC command on the command switch to display
information about the cluster members.
Syntax Description n
detail
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.1(4)EA1
Usage Guidelines You should enter this command only on a command switch.
If the cluster has no members, this command displays an empty line at the prompt.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show cluster members command. The SN in the display means
switch number.
Switch# show cluster members
SN MAC Address
0 0002.4b29.2e00 StLouis1
1 0030.946c.d740 tal-switch-1 Fa0/13
2 0002.b922.7180 nms-2820
3 0002.4b29.4400 SanJuan2
4 0002.4b28.c480 GenieTest
This is an example of output from the show cluster members for cluster member 3:
Switch# show cluster members 3
Device 'SanJuan2' with member number 3
OL-8566-01
show cluster members [n | detail] [ | {begin | exclude | include} expression]
(Optional) Number that identifies a cluster member. The range is from 0 to 15.
(Optional) Display detailed information for all cluster members.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Name
Device type:
MAC address:
Upstream MAC address:
Local port:
Upstream port:
Hops from command device: 2
|---Upstream---|
PortIf FEC Hops SN PortIf
0
1 0 Gi0/1
10 0 2 1 Fa0/18
Gi0/1 2 1 Fa0/11
Gi0/2 2 1 Fa0/9
cisco WS-C3550-12T
0002.4b29.4400
0030.946c.d740 (Cluster member 1)
Gi0/1 FEC number:
Fa0/11 FEC Number:
Catalyst 3550 Multilayer Switch Command Reference
show cluster members
FEC State
Up (Cmdr)
Up
Up
Up
Up
2-327