Menu And Key Conventions - Agilent Technologies 54751A Manual

Menu and Key Conventions

The keys labeled Trigger, Disk, and Run are all examples of front-panel keys.
Pressing some front-panel keys accesses menus of functions that are displayed
along the right side of the display screen. These menus are called softkey
menus.
Softkey menus list functions other than those accessed directly by the
front-panel keys. To activate a function on the softkey menu, press the
unlabeled key immediately next to the annotation on the screen. The
unlabeled keys next to the annotation on the display are called softkeys.
Additional functions are listed in blue type above and below some of the
front-panel keys. These functions are called shifted functions. To activate a
shifted function, press the blue front-panel Shift key and the front-panel key
next to the desired function.
Throughout this manual front-panel keys are indicated by a box around the
key label, for example,
key label, for example,
the front-panel key pressed and which menu is selected. Shifted functions
are indicated by the front-panel
function, for example the Local function (above the
key) will be shown as
4
A softkey with On and O in its label can be used to turn the softkey's
function on or o . To turn the function on, press the softkey so On is
highlighted. To turn the function o , press the softkey so O is highlighted.
An On or O softkey function will be indicated throughout this manual as:
NNNNNNNNNNNNNN On.
Test
A softkey such as
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Sweep Triggered Freerun
functions. In this case you could choose Triggered by pressing the softkey
until Triggered is highlighted, or choose Freerun by pressing the softkey until
Freerun is highlighted. A choices softkey will be indicated throughout this
manual as:
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Sweep Triggered Freerun
When some softkeys, such as
a measurement will be made and the result will be provided. Some softkeys,
such as NNNNNNNNNNNNNNNNNNNN require the entry of a numeric value. To enter or change the
Offset
1-4
FINAL TRIM SIZE : 7.5 in x 9.0 in
. Softkeys are indicated by shading on the
4 Timebase 5
. The softkeys displayed depend on
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Mask Align
key followed by the shaded shifted
4 Shift 5
, .
Shift 5 4 Local 5
Triggered.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Calibrate probe
front-panel
Stop/Single
4 5
o ers you a choice of
, are pressed the rst time,