Channel 4 - Input/Output - Siemens FST020 Function Manual

4.8.1.3

Channel 4 - Input/output

4.8.1.3.1 Operation mode
Description
Set the output functionality you want the channel to operate.
Setting
Default
Related
The setting of this parameter affects the setting options in parameter Simulation value.
Path
4.8.1.3.2 Simulation
Description
Enables or disables simulation of Channel 4 input/output.
Setting
Default
Related
Only if this parameter is set to Enabled, then the setting of parameter Simulation value will
be relevant.
Path
4.8.1.3.3 Simulation value
Description
Set the frequency value to be output on the channel when frequency output simulation is
enabled.
Set the pulse value to be output on the channel when pulse output simulation is enabled.
Setting
Default
Operation mode is set to Frequency output
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
Off; Frequency output; Pulse output
Off
Maintenance and diagnostics → Simulation → Simulation inputs and outputs → Channel 4 -
input/output → Operation mode
Disabled; Enabled
Disabled
Maintenance and diagnostics → Simulation → Simulation inputs and outputs → Channel 4 -
input/output → Simulation
0.0 Hz to 12500.0 Hz
1.0 Hz
Maintenance and diagnostics
4.8 Simulation
161