View; 1St Process Value; 2Nd Process Value - Siemens FST020 Function Manual

3.13.2

View

Description
The display View 6 can be configured.
Setting
Default
Related
If Single Value or Dosing is selected, 1st Process Value must be configured.
If Three Values is selected, 1st Process Value, 2nd Process Value and 3rd Process Value
must be configured.
If Totalizer or 1 Value and Graph is selected, 1st Process Value, Trend Scale Mode and
Trend log time window must be configured.
If 1 Value and Bargraph is selected, 1st Process Value must be configured.
If Six Values or Six Diagnostic Values is selected, 1st Process Value, 2nd Process Value,
3rd Process Value, 4th Process Value, 5th Process Value, and 6th Process Value must be
configured.
Path
3.13.3

1st process value

Description
The display 1st Process Value can be selected. This process value is shown in all view
types.
Setting
Default
Related
Path
3.13.4

2nd process value

Description
The display 2nd Process Value can be selected.
Setting
Default
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
Single value; Three values; Totalizer; Dosing; 1 value and bargraph; 1 value and graph;
Six values; Six diagnostic values; Alarm list
Alarm list
Setup → Local display → View 6 → View
Mass flow; Volume flow; Density; Fluid Temperature; Totalizer 1
Massflow
Setup → Display → View 6 → 1st Process Value
Mass flow; Volume flow; Density; Fluid Temperature; Totalizer 1
Density
Setup
3.13 View 6
115