Custom Conversion Factor; Decimal Places; Low Flow Cut-Off - Siemens FST020 Function Manual

Setting
Default
Related
Path
3.2.3.3

Custom conversion factor

Description
Conversion factor for custom unit flow velocity values based on SI velocity units m/s.
Setting
Default
Related
Path
3.2.3.4

Decimal places

Description
Sets the decimal places for the process value displayed in the local display.
Setting
Default
Related
Path
3.2.3.5

Low flow cut-off

Description
Flow velocity limit for low flow cut off. Below limit flow velocity output is forced to zero.
Setting
Default
Related
Path
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
-
-
Setup → Process values → Flow velocity → Custom units
-
1.0
Setup → Process values → Flow velocity → Custom conversion factor
Auto; No decimal place; 1 decimal place; 2 decimal places; 3 decimal places; 4 decimal
places; 5 decimal places; 6 decimal places
2 decimal places
Setup → Process values → Flow velocity → Decimal places
Min 0.00
0.0 m/s
Setup → Process values → Flow velocity → Low flow cut-off
Setup
3.2 Process values
45