Custom Conversion Factor; Decimal Places; Low Flow Cut-Off - Siemens FST020 Function Manual

Setup
3.2 Process values
Setting
Default
Related
Path
3.2.2.3

Custom conversion factor

Description
User specific conversion factor based on SI mass flow units kg/s.
Setting
Default
Related
Path
3.2.2.4

Decimal places

Description
Sets the decimal places for the process value displayed in the local display.
Setting
Default
Related
Path
3.2.2.5

Low flow cut-off

Description
Mass flow limit for low flow cut off. Below limit mass flow output is forced to zero.
Setting
Default
Related
Path
42
-
-
Setup → Process values → Mass flow → Custom units
-
1.0
Setup → Process values → Mass flow → Custom conversion factor
Auto; No decimal place; 1 decimal place; 2 decimal places; 3 decimal places; 4 decimal
places; 5 decimal places; 6 decimal places
2 decimal places
Setup → Process values → Mass flow → Decimal places
0.00 to 3682800.00 kg/h (depends on sensor)
0.1% of maximum mass flow (depends on sensor)
Setup → Process values → Mass flow → Low flow cut-off
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA