View 5; Enable Or Disable; View - Siemens FST020 Function Manual

Setup

3.12 View 5

Setting options
Default setting
Related
This parameter is only available if Trend Scale Mode is set to Fixed.
Path
3.12

View 5

3.12.1

Enable or disable

Description
In this parameter View 5 can be enabled.
Setting
Default
Related
If Enabled is selected, all parameters for View 5 must be configured.
Path
3.12.2 View
Description
The display View 5 can be configured.
Setting
Default
Related
If Single Value or Dosing is selected, 1st Process Value must be configured.
If Three Values is selected, 1st Process Value, 2nd Process Value and 3rd Process Value
must be configured.
If Totalizer or 1 Value and Graph is selected, 1st Process Value, Trend Scale Mode and
Trend log time window must be configured.
If 1 Value and Bargraph is selected, 1st Process Value must be configured.
If Six Values or Six Diagnostic Values is selected, 1st Process Value , 2nd Process Value,
110
0
Setup → Display → View 4 → Trend Scale Upper Limit
Disabled; Enabled
Enabled
Setup → Display → View 5 → Enable or disable
Single value; Three values; Totalizer; Dosing; 1 value and bargraph; 1 value and graph;
Six values; Six diagnostic values; Alarm list
Three values
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA