Introduction
1.1
Function Manual scope
Note
This Function Manual applies to the SITRANS FST020 only.
The FST020 transmitter can be connected to sensor types FSS200 and FSS300.
1.2
Purpose of this documentation
This manual contains a description of all device parameters and is aimed at persons
configuring the device.
The default settings and the setting ranges are listed in tables for each parameter.
Furthermore, the relation, if any, between parameters is described.
As of chapter 3, Setup (Page 19), the chapter and subchapter numbers equal the parameter
numbers in the HMI structure.
For parameters with access level other than User (for example Read only or Expert), the
access level is stated in parenthesis after the parameter name.
1.3
Quick start wizards
The device offers a set of wizards which will guide you through configuration of parameters
essential for your application. The quick commissioning wizards are described in the
Commissioning chapter of the device Operating Instructions.
1.4
Support
For product support, or to contact a Siemens representative, see Technical support
(Page 187).
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
1
13