Setup
3.4 Inputs and outputs
Setting
Default
Related
Path
3.4
Inputs and outputs
The available configuration of the hardware functionality of input and output is described in
the following table.
Table 3- 1
Channel
1
2
3
4
Current output
All four channels can be configured as current output.
Current output configuration
The following process values can be assigned to the current output:
● Volume flow
● Mass flow
● Sound velocity
● Flow velocity
● Density
62
Process value = Mass flow: 0.00 kg to +9999997952 kg
Process value = Volume flow: 0.00 m³ to +9999997952 m³
Process value = Mass flow: 0.00 kg
Process value = Volume flow: 0.00 m³
Setup → Totalizers → Totalizer 1 → Alarm and warning limits → Hysteresis
Hardware and software configuration of the input/output channels
HW configuration
(fixed when ordering)
Modbus
Signal output
Relay output
Signal input/output
SW configuration
available to the user
Modbus
Outputs:
Current output (0/4-20 mA)
•
Status Output:
Alarm class
•
Alarm item
•
NAMUR status signals
•
Outputs:
Frequency ouput
•
Pulse output
•
Function Manual, 09/2017, A5E42949526-AA
FST020 Function manual