1St Value; 2Nd Value - Siemens FST020 Function Manual

Setup
3.11 View 4
Related
If Single Value or Dosing is selected, 1st Process Value must be configured.
If Three Values is selected, 1st Process Value, 2nd Process Value and 3rd Process Value
must be configured.
If Totalizer or 1 Value and Graph is selected, 1st Process Value, Trend Scale Mode and
Trend log time window must be configured.
If 1 Value and Bargraph is selected, 1st Process Value must be configured.
If Six Values or Six Diagnostic Values is selected, 1st Process Value, 2nd Process Value,
3rd Process Value, 4th Process Value, 5th Process Value, and 6th Process Value must be
configured.
Path
3.11.3

1st value

Description
The display 1st Process Value can be selected. This process value is shown in all view
types.
Setting
Default
Related
Path
3.11.4

2nd value

Description
The display 2nd Process Value can be selected.
Setting
Default
106
Setup → Display → View 4 → View
Transmitter internal temperature; Ch3 value; Ch4 value; Reynolds number; RxGain up path
1; RxGain down path 1; SNR up path 1; SNR down path 1; Sound velocity path 1; Flow
velocity path 1; Delta time path 1; Travel time up path 1; Travel time down path 1; Correla-
tion factor path 1; Percentage of bursts accepted path1; Peak amplitude up path 1; Peak
amplitude down path 1; Min acc travel time path 1; Min acc travel time path 1; Max acc
travel time path 1
Flow velocity path 1
Setup → Display → View 4 → 1st value
Transmitter internal temperature; Reynolds number; RxGain up path 1; RxGain down path
1; SNR up path 1; SNR down path 1; Sound velocity path 1; Flow velocity path 1; Delta
time path 1; Travel time up path 1; Travel time down path 1; Correlation factor path 1; Per-
centage of bursts accepted path1; Peak amplitude up path 1; Peak amplitude down path 1;
Min acc travel time path 1; Min acc travel time path 1; Max acc travel time path 1
Flow velocity path 1
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA