Configuration Of Test Blocks; About; Sensor Size - Siemens FST020 Function Manual

3.1.12

Configuration of test blocks

3.1.12.1

About

Description
NOTICE
Configuration data overwrite error
Running the test block configuration procedure will overwrite any existing sensor
configuration.
Do not run the test block configuration procedure if configuration data is needed. Back up
and record data as necessary.
The wizard configures the device for use with the Siemens sensor test blocks including
sensor size and sensor path. It also allows for saving the setting.
3.1.12.2

Sensor size

Sensor size
A1
A2
B1
B2
B3
C1
C2
C3
D1
D2
D3
Save settings
After settings are complete, press the right arrow to save sensor test block settings.
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
Sensor path
Path 1; Path 2
Path 1; Path 2
Path 1; Path 2
Path 1; Path 2
Path 1; Path 2
Path 1; Path 2
Path 1; Path 2
Path 1; Path 2
Path 1; Path 2
Path 1; Path 2
Path 1; Path 2
Setup
3.1 Sensor settings
37