Decimal Places; Direction; Fail-Safe Behaviour; Reset - Siemens FST020 Function Manual

3.3.1.5

Decimal places

Description
Sets the decimal places for the process value displayed in the local display.
Setting
Default
Related
Path
3.3.1.6

Direction

Description
Totalizer 1 direction.
Setting
Default
Related
Path
3.3.1.7

Fail-safe behaviour

Description
Behaviour of the totalizer during the occurrence of bad input value.
Setting
Default
Related
Path
3.3.1.8

Reset

Description
Reset totalizer to zero.
Setting
Default
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
Auto; No decimal place; 1 decimal place; 2 decimal places; 3 decimal places; 4 decimal
places; 5 decimal places; 6 decimal places
2 decimal places
Setup → Totalizers → Totalizer 1 → Decimal places
Forward and backward; Forward; Backward; Hold
Forward
Setup → Totalizers → Totalizer 1 → Direction
RUN; totalization is continued using the bad input value; HOLD; totalization is stopped;
MEMORY; totalization is continued based on the last incoming good value
RUN; totalization is continued using the bad input value
Setup → Totalizers → Totalizer 1 → Fail safe mode
Cancel; OK
Cancel
Setup
3.3 Totalizers
59